Cryonick Wellness Technology Factory Antarctica Electric Whole Body Cryotherapy Chamber: A Complete Overview for Modern Wellness Businesses

A New Approach to Whole-Body Cryotherapy

The Cryostar Antarctica Electric Whole Body Cryotherapy Chamber gives wellness businesses a way to offer full-body cold exposure without using liquid nitrogen. Instead of relying on gas, the system cools the cabin using electric compressors, circulating chilled, breathable air around the client during short sessions.

For spas, athletic recovery centers, and clinics that prefer an electric setup, this chamber offers a clean and consistent approach to cryotherapy while maintaining a premium client experience.

The chamber is available in two versions — Simple and Grand — so operators can choose the configuration that best matches their space, electrical capacity, and session volume.

A Fully Electric, Nitrogen-Free System

What sets the Antarctica Electric apart is its fully electric cooling design. Everything is driven by compressor technology — no nitrogen tanks, refills, or vapor considerations.

With this setup, the chamber:

• Cools using breathable cold air
• Pre-cools in up to 60 minutes
• Runs entirely on electric infrastructure
• Is compatible with air-cooled, water-cooled, or external chiller layouts

This makes it a strong option for facilities that want a predictable operating framework and prefer to avoid handling cryogenic gas.

Designed for a Full-Body Cryotherapy Experience

The Cryostar Antarctica Electric is a fully enclosed chamber, meaning the entire body — including the head — is inside during a session. This design is becoming increasingly popular in wellness and performance environments that want to offer an immersive, whole-body experience.

Client-Focused Interior

• Spacious cabin with a modern aesthetic
• Frosted glass door for an open feel while maintaining privacy
• Low entry height to make stepping in and out easier

Operator Controls

The 10.1” touchscreen gives staff clear, simple control over:

• Session duration
• Temperature settings within system limits
• Real-time system status
• Preset program selection

Sessions typically last 1–3 minutes, depending on the client and the facility’s operating guidelines.

Experience Enhancements

Depending on the configuration chosen, the system may include:

• Built-in speaker system for ambient music
• Two-way voice communication
• Optional ambient projector lights

These elements help facilities create a calm, elevated environment for clients.

Safety Features and Built-In Monitoring

The supplier-provided specifications outline several integrated safety components designed for commercial operation. These include:

• Oxygen sensors
• Emergency stop mechanisms
• Thermal insulation for consistent cabin performance
• Auto-dry warm air system to clear moisture after sessions (where included)

Operators should always follow the official user manual for setup, staff training, and session procedures.

Choosing Between the Simple and Grand Versions

Both versions use the same core technology, but they differ in size, cooling output, and power requirements.

Cryostar Antarctica Electric — Simple Version

• Length: 1870 mm (73”)
• Width: 1105 mm
• Height: 2292 mm
• Cooling: Single electric compressor
• Minimum temperature: Down to –75°C
• Power options:
  • 110V 70A
  • 240V 35A
  • 400V 25A
  • Works with 1-phase or 3-phase setups

This model is well-suited for facilities with moderate electrical capacity or more limited floor space.

Cryostar Antarctica Electric — Grand Version

• Length: 2230 mm (86”)
• Width: 1105 mm
• Height: 2292 mm
• Cooling: Dual electric compressors
• Minimum temperature: Down to –100°C
• Power options:
  • 208V 50A
  • 400V 25A
  • Requires 3-phase power

The Grand version is ideal for higher-traffic facilities, thanks to its stronger cooling capability and faster pre-cool times.

Installation and Room Requirements

The Cryostar Antarctica Electric offers three installation approaches. The right choice depends on your room size, ventilation, and existing infrastructure.

Air-Cooled Setup

• Recommended room size: 15 m² / 150 ft² or more
• Requires proper ventilation and air conditioning
• Straightforward to install if HVAC conditions are adequate

Water-Cooled Setup

• Recommended room size: 12 m² / 120 ft² or more
• Needs a cold water supply and drain
• Useful when operators want to reduce thermal load in the room

External Water Chiller

• Installed outside the main room
• Needs dedicated electrical power and pipe routing
• Good for facilities with limited space or specific HVAC constraints

Every installation is different, so facilities should review the complete technical documentation when planning their space.

How Facilities Typically Use the Antarctica Electric

Because it's fully electric and built for commercial operation, this chamber fits naturally into a variety of professional environments, including:

• Spas and luxury wellness centers
• Athletic and sports recovery studios
• Performance and rehabilitation facilities
• Beauty and rejuvenation environments
• Retreats and integrative wellness programs

Facilities usually integrate the chamber into short, scheduled sessions as part of a wider recovery or wellness offering.

Operational Flow: From Pre-Cool to Next Client

Here’s what a typical workflow looks like:

1. Pre-cooling
   The system reaches operating temperature in up to 60 minutes.
2. Client preparation
   Staff review guidelines and ensure clients understand the process.
3. Session
   Timed, supervised sessions inside the cabin.
4. Turnover
   Auto-dry and standard cleaning procedures prepare the chamber for the next appointment.

Many operators pair whole-body cryotherapy with services like red light therapy, localized cryo, or compression treatments to create bundled wellness experiences.

Important Details, Warranty Notes, and Use Disclaimer

As noted in the supplier information:

• This equipment is designed for sports recovery, fitness, and general wellness use.
• It is not an FDA-approved medical device and is not intended to diagnose, treat, cure, or prevent any medical condition.
• Sales are not available in Canada.
• Installation should be performed by qualified technicians familiar with the system’s power and cooling requirements.
• Training and remote support are available through the manufacturer, depending on the chosen configuration.

For the most accurate and detailed instructions, operators should always refer to the official user manual and technical documentation.

If you’d like a detailed breakdown of features, installation requirements, and available configurations, you can view the full Cryostar Antarctica Electric chamber on our product page.

If you’d like to compare additional whole-body, localized, or roller-based systems, you can browse our complete Cryotherapy Equipment collection .